In-STOCK spares ..ready to ship2day [Encoders,Sensors, Servo Drive Motors and CNC/PLC spares]

Sick AFS60E-S4AA004096 Absolute Encoder 1037630

Array

4,096(12bit) x 1 Single Turn,Electrical interface SSI/Gray;4.5 V DC ... 32 V DC;Solid shaft10 mm Face mount flange

Description

PERFORMANCE

Max. number of steps per revolution	4,096
Max. number of revolutions	1
Resolution power	4,096 x 1
Resolution	12 bit
Error limits	± 0.2°
Repeat accuracy	0.002°
Measuring step deviation	± 0.2°
Measuring step	0.09° 360° / number of steps
Initialization time	50 ms 1)
Position forming time	< 1 µs

INTERFACES

Electrical interface	SSI/Gray
Interface signals	Clock +, Clock -, Data +, Data-
Clock frequency	1 MHz 1)
Set (electronic adjustment)	H-active (L = 0 - 3 V, H = 4,0 - Us V)
CW/CCW (counting sequence when turning)	L-active (L = 0 - 1,5 V, H = 2,0 - Us V)

ELECTRICAL DATA

Connection type	Male connector, radial
Power consumption	0.5 W (without load)
Operating voltage range	4.5 V DC ... 32 V DC
Code type	Gray
Reverse polarity protection	✔
MTTFd: mean time to dangerous failure	250 years (EN ISO 13849-1) 1)

1) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.

MECHANICAL DATA

Mechanical interface	Solid shaft, Face mount flange
Shaft diameter	10 mm
Shaft length	19 mm
Weight	0.3 kg
Start up torque	0.5 Ncm (+20 °C)
Operating torque	0.3 Ncm (+20 °C)
Permissible movement axial static/dynamic	± 0.5 mm, ± 0.2 mm
Permissible movement radial static/dynamic	± 0.1 mm
Permissible Load capacity of shaft	80 N / radial 40 N / axial
Moment of inertia of the rotor	6.2 gcm²
Bearing lifetime	3.0 x 10^9 revolutions
Max. angular acceleration	≤ 500,000 rad/s²