CONTROL TECHNIQUES Servo Motor Repairs at UAE Encoder Replace| Brake Replace| Bearing Replace

We Are Available Right Here in UAE to Help you“Preserve Your Investment” in  CONTROL TECHNIQUES  Servo Motorsby Restoring faulty motors to Working condition & Validating Suspected motors by Run-Test

We are welll equipped to handle Stegmann Hiperface encoders found fitted on many of Control Techniques Servomotors.

 

https://www.youtube.com/watch?v=yZ0YPBM2MYM&feature=youtu.be

 

Control Techniques Repair UAE Oman Bahrain Qatar KSA Saudi Arabia Iraq KuwaitLebanon Syria JordanAlgeria Djibouti Egypt Libya Malta Morocco TunisiaWe can Record alignment from Stegmann (SICK) Serial Encoders , carry out  Diagnostic Test for validating the Encoder working, Copying program from Old encoder to the New one and Re-Install that Sick Encoder into your Control Techniques motors.

We have prior knowledge of Replacing Encoders/Bearings and various other repair tasks on :

v  Stegmann Dicoder is found on many Control Techniques servo motor, We have the Requisit   17 pin M23 Connector to hook to Dicoder and Read/ Record/ Restore the Alignment information.

v  MGE series of Control Techniques /Emerson  come fitted with Commutating encoder ABZ/UVW can be repaired and also if there is an issue with its 23 pin Bayonet  connector we can replace that.

v  MGM series of Control Techniques /Emerson  come fitted with Commutating encoder ABZ/UVW can be repaired and also if there is an issue with its 21 pin Bayonet  connector we can replace that.

v  MPM series of Control Techniques /Emerson  come fitted with Commutating encoder ABZ/UVW can be repaired and also if the Power Connector or the 23 pin Bayonet Encoder  connector is broken we can replace that.

v  Control Techniques Servo motors of Series Unimotor come fitted with Heidenhain EnDat Encoder, We can read memory, copy program to New Encoder and reinstall.

v  If your CT motor is fitted with Stegmann CT-Coder we have the equipment to handle its dismantly/ assembly

v  Control Techniques servo motors of the sEries DutymAx fitted Resolver can be fixed. We have the system to Read / Restore Resolver Alignment. Most of DutyMax motors come fitted fitted with 10 pin Bayonet connector 

 

 

 

You may utilize our expert servo Repair services in Scenarios where:

You have a  CONTROL TECHNIQUES  Servo Motor whereyou aresure MOTOR Feedback Encoder is Faulty- We can quickly get you up and running by arranging a New encoder from Stockor Through our Associates around theworld,and Replacing it on the motor to get it Working Again. We will Run-Test it so it is ready to “drop in” at your Machine tool.

You want tomake certainif the  CONTROL TECHNIQUES  Servo Motor ’sMOTOR Feedback Encoder is Faulty or Not.:We can carry out a Health Check of encoder feedback and validate it’s Working. Depending upon the Encoder we can check many characteristics e.g. check Count/ Phase angle/ Z pulse/ Commutating pulses.

You needhelp in Diagnosing the Real Cause of Servo Errors:Encoder? or Motor? Or Cables? Or Servo Drive? :In case your Servo installation-  CONTROL TECHNIQUES  Servo Motor /It’s Encoder/ It’s Drive combo is giving you some trouble and you want to identify the real cause of error. We can help you isolate where the problem is rooted. We can test Encoder feedback independent of your Existing Drive/Controlleratyour machine. And we can Run Test the  CONTROL TECHNIQUES  Servo Motor independent of your Drive, We have Universal Drive set up to run virtually any motor.( Current & Available Cables to connect your motor is the limiting factor of course).

You Attempted to Repair CONTROL TECHNIQUES  Servo Motor on your own ..detached the Encoderand Nowwant to ReAssemble & REAlign it to rotor:- You may be attempting to Replace the Bearing or Brake of your  CONTROL TECHNIQUES  Servo Motor or Motorrewind..In any suchcasesit is imperative to detach the fitted encoder from the Rotor shaft. Once detached the encoder needs to be Realigned Again. This Realignment needs special skills and instruments that are available with us.

Control Techniques Repair MGE MGM MPM HQL UNI motor unimotors DutymAx Control Techniques Control Techniques - Feedback turning Faulty | Brake Faulty | Bearings Faulty | Connector Broken…of course there could be many other issues that lesser number of users must have faced but We can help you with all the major ones listed above + support you more as below

ü We can check your  CONTROL TECHNIQUES  Servo Motor by Run Testingit outside Your Machine setup

ü We Check The Health of & Validate Working of  CONTROL TECHNIQUES  Servo Motor‘s Feedback

ü If the Encoder is Faulty – You can buy New encoder from us.:We have many Encoders/ Resolvers in Stock at Ajman | if we do not have the required encoder then we can arrange that atveryshort turn around time.

ü Ask us to Replace/ ReAlign / Reprogram “Bought Encoder” on your  CONTROL TECHNIQUES  Servo Motor

ü We can Run-Test the  CONTROL TECHNIQUES  Servo Motor to Validate the Encoder Installation.

ü You can also Buy Brake & Get Brake Replacement doneon CONTROL TECHNIQUES  Servo Motor

We stock brakes from several manufacturers.We of coursecan’t stock everything so we will arrange the Brake needed for your  CONTROL TECHNIQUES  Servo Motor from the OEM at shortest possible time.

ü You can also Buy Connectors & Get Connector Replacement Done on  CONTROL TECHNIQUES  Servo Motor :We have Severaltypeof Motor Power Connectors/ Encoder Connectors in Stock- both in Solder & Crimped contact versions. We have Special tools needed for crimping. We can also build Power Cables/ Encoder feedback Cables for connecting  CONTROL TECHNIQUES  Servo Motor atyour Machine.

üYou may have a Stock  CONTROL TECHNIQUES  Servo Motor lying on the shelf for Long. You do not know if it is working or not. Ask us to Check.

üYou bought a Used  CONTROL TECHNIQUES  Servo Motor from someplace .. you want to make certain that the motor is in Working condition. ask  CONTROL TECHNIQUES  Servo Motor to step in and validate. So you can confidently use the motor on your Machine tool.

There could be any other  CONTROL TECHNIQUES  Servo Motor situation. you might be grapplingwith..let us talk .. we might be of help with our experience and Specialized Inspection instruments.

Encoders/Resolvers for Sale|  CONTROL TECHNIQUES  Servo Motor Repairs| Feedback ReAlignment & ReProgramming .. Email us at This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Hiperface|EnDat|  CONTROL TECHNIQUES  | Fanuc|Heidenhain| 1Vpp|Incremental|Serial|Absolut| Hall Effect|

 

Control Techniques Repair Servo motor Servo Motor Repair Encoder Encoder Repair Servo motor Encoder Stegmann Sick Sick Encoder Dubai

Control Techniques Repair MGE MGM MPM HQL UNI motor unimotors DutymAx Control Techniques Control Techniques

What else we do other than SERVO MOTOR Repairs:

We offer from Our OWN Stock of CNC PLC spare parts. Servo Motors Drives and of course these Lithium Batteries -3v, 3.6v, 6V for CNC PLC controllers.

We stock Tadiran, Toshiba, Saft, Varta, Mitsubishi, FDK, Sanyo, Panasonic, Maxell Hitachi lithium Batteries. and have many batteries with Specific connectors for direct use on various CNC and PLC systems of Siemens, Fanuc, Mitsubishi, Omron, Rexroth, AllenBradley , Panasonic.. and more.

We stock Many Rotary Encoders ( Incremental and Absolute type in Hollow/ Solid Shaft versions and with many Output signals ( TTL, HTL, 1Vpp, 11uAss. Hall ABZUVW type, Hiperface, Endat, Profibus, CAnbus, Interbus, .. and more.) Baumer, Sick Stegmann, Heidenhain, Hubner, Leine & Linde, Baumer, Hengstler, Pepperl Fuchs, Kubler, BAlluff, Euchner, ASM, BEI, TR Electronic, Wachndroff, POSITAL Fraba, TWK ELEKTRONIK GmbH, Lenord+Bauer, SIKO, Wachendorffm, Balluff, Euchner, Kubler,ASM,

We can offer Equivalent Encoder to many encoder brands.. eg. ABB, Allenbradley, Fagor, Renishaw, Omron,Telemecanique, IFM, ELMA, Faulhaber, , BEI, Elap, Elcis, Givi Misure, ITAL Sensors, Nidec Copal Electronics, Micronor , Duesterloh Fluidtechnik, RSF Elektronik, ZanderAachen , Kiwi, Honest Sensor, Opkon, Sensor Engineering, AMCIM, ECE, Dynapar, RotaLink, Olympus, Bernio Electronics, Meler, Dewe-Rie Encoder, Agromatic.. Let us know what you look for and we find a Solution for you.

 

We are not affiliated with, nor an authorized distributor or representative of any manufacturer, brand or product listed.

 

Designated trademarks, brand names and brands appearing herein are the property of their respective owners.

 

 

We are welll equipped to handle Stegmann Hiperface encoders found fitted on many of Control Techniques Servomotors.

We can Record alignment from Stegmann (SICK) Serial Encoders , carry out  Diagnostic Test for validating the Encoder working, Copying program from Old encoder to the New one and Re-Install that Sick Encoder into your Control Techniques motors.

We have prior knowledge of Replacing Encoders/Bearings and various other repair tasks on :

v  Stegmann Dicoder is found on many Control Techniques servo motor, We have the Requisit   17 pin M23 Connector to hook to Dicoder and Read/ Record/ Restore the Alignment information.

v  MGE series of Control Techniques /Emerson  come fitted with Commutating encoder ABZ/UVW can be repaired and also if there is an issue with its 23 pin Bayonet  connector we can replace that.

v  MGM series of Control Techniques /Emerson  come fitted with Commutating encoder ABZ/UVW can be repaired and also if there is an issue with its 21 pin Bayonet  connector we can replace that.

v  MPM series of Control Techniques /Emerson  come fitted with Commutating encoder ABZ/UVW can be repaired and also if the Power Connector or the 23 pin Bayonet Encoder  connector is broken we can replace that.

v  Control Techniques Servo motors of Series Unimotor come fitted with Heidenhain EnDat Encoder, We can read memory, copy program to New Encoder and reinstall.

v  If your CT motor is fitted with Stegmann CT-Coder we have the equipment to handle its dismantly/ assembly

v  Control Techniques servo motors of the sEries DutymAx fitted Resolver can be fixed. We have the system to Read / Restore Resolver Alignment. Most of DutyMax motors come fitted fitted with 10 pin Bayonet connector 

TTL HTL 1Vpp 11UAss Endat Profibus SSI CanBus Devise Net Encoders in stock .. ship today from Dubai

Brand Names- Motor Repaired at Dubai [SlideShow]