
TOSHIBA ER3V/3.6V Lithium battery or MITSUBISHI C52005 battery for sale on Cnc-shopping website. TOSHIBA battery installed on MITSUBISHI Meldas CNC Controller for CNC Machine-tools or PLC Memory Backup units who requires this type of battery TOSHIBA ER3V/3.6V. Voltage of this battery is 3.6V (1200mAh). This TOSHIBA ER3V/3.6V comes with a 2 pins connector
TOSHIBA ER3V/3.6V Ultra Lithium Battery 3.6 Volts (24 x 14mm - 0.94in x 0.55in). Cable length is 5cm. Its a genuine and original battery from TOSHIBA manufacturer made in Japan and not a substitue product.
TOSHIBA ER3V/3.6V Ultra Lithium Battery for Meldas MITSUBISHI CNC Machine Tool (such as Mazak, Mori Seiki, Hitachi etc.) and some brands of PLC.
(Compatible and replaces the following references ER3V-C FBT020A FBT030A NP8P-BT Comp310)
Fuji FBT020A - FBT030A LS14250-MR LS14250-MR Fuji NP8P-BT Battery for CNC - PLC and CPU Modules
Replaces - C52005, ER3V-C, ER3V/3.6V, FBT020A, FBT030A, NP8P-BT, Comp310
Fuji Electric MICREX-F, MICREX-SX series, Toyo Denki μGPCsH, μGPCsx series and Mitsubishi Automation C52005 for CPU modules for programmable logic controllers and industrial computers.Product Details here:
C52005
Comp310
ER3V-C
ER3V/3.6V
FBT020A
FBT030A
LS14250-MR
NP8P-BT
Fuji Electric MICREX-F
Fuji Electric MICREX-SX
Fuji NP8P-BT
Mitsubishi Automation C52005
Toyo Denki μGPCsH
Toyo Denki μGPCsx
http://www.toshiba.co.jp/battery/en/products/primary/lithium/index.htm
Model No. | Nominal Voltage | Nominal Capacity | Diameter | Overall Height | Discarge Current | Weight |
---|---|---|---|---|---|---|
ER3V | 3.6 V | 1,000 mAh | 14.5 mm | 28.0 mm | max. 1.0 mA | 8.5 g |
ER4V | 3.6 V | 1,200 mAh | 14.5 mm | 33.0 mm | max. 1.0 mA | 10.0 g |
ER6V | 3.6 V | 2,000 mAh | 14.5 mm | 50.5 mm | max. 3.5 mA | 16.0 g |