- Absolute singleturn encoder
- Resolution: up to 15 bits (32,768 increments)
- Electrical interface: SSI with gray code type or gray capped
- Electrical interface: Parallel with gray, gray capped, binary, BCD code type
- Zero-set function
- Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
- Enclosure rating: Up to IP66
Your benefits
- Freely programmable resolution (up to 15 bits)
- Simple zero adjustment directly by press of a button on the encoder or via signal line (cable version)
- Suitable for all mounting methods thanks to individual mechanical interfaces
- A basic device for flexible use thanks to simple interchangeable collets for blind hollow shaft and through hollow shaft
- Versions with cable and M23 connector outlet available in axial and radial designs
PerformanceMax. number of steps per revolution:8,192Max. number of revolutions:1Resolution power:8,192 x 1Error limits:0.035 ° (binary number of steps)
0.046 ° (non-binary number of steps)Repeat accuracy:0.005 °Measuring step deviation:0.005 °, 0.016 °Measuring step:360 ° /number of linesInitialization time:80 ms
1)1) Valid positional data can be read once this time has elapsed Mechanical dataMechanical interface:Solid shaft, Face mount flangeShaft diameter:10 mmMass:0.3 kgStart up torque:0.4 NcmOperating torque:0.3 NcmPermissible Load capacity of shaft:20 N (radial)
10 N (axial)Maximum operating speed:10,000 /min (without shaft seal)
6,000 /min (with shaft seal)
1)Moment of inertia of the rotor:54 gcm²Bearing lifetime:3.6 x 10^9 revolutionsMax. angular acceleration:500,000 rad/s²Operation of zero-set:≥ 100 ms
2)1) If the shaft seal has been removed by the customer
2) Only with shaft stationary (note initialisation time) Electrical dataOperating voltage range:10 V DC ... 32 V DCOperating power consumption (no load):60 mA InterfacesElectrical interface:Connector M23, 12-pin, radial